Stainless Steel Machine Screw, Flat Head, Tamper Resistant Pin-in-Star Drive, #8-32, 3/8" Length (Pack of 100)

Stainless Steel Machine Screw, Flat Head, Tamper Resistant Pin-in-Star Drive, #8-32, 3/8" Length (Pack of 100) Reviews



Other Picture


Stainless Steel Machine Screw, Flat Head, Tamper Resistant Pin-in-Star Drive, #8-32, 3/8" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Flat head style allows fastener to sit flush to the surface
  • Prevents tampering by requiring special tool to remove
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Loosening tamper-resistant fasteners requires rare tools that the average user is not likely to have on hand, often preventing vandalism, theft, or product modifications by untrained users. Although not impossible to obtain, drivers for tamper resistant screws are rare and usually more difficult to find.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Feb 24, 2011 09:04:04

0 comments:

Post a Comment