Nylon 6/6 Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100)

Nylon 6/6 Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)

Detail Reviews

Sep 29, 2011 20:38:10

Stainless Steel 316 Machine Screw, Round Head, Slotted Drive, #10-32, 3/4" Length (Pack of 10)

Stainless Steel 316 Machine Screw, Round Head, Slotted Drive, #10-32, 3/4" Length (Pack of 10) Reviews

Other Picture

Stainless Steel 316 Machine Screw, Round Head, Slotted Drive, #10-32, 3/4" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
• Round head style for a finished appearance
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #8-32, 2-1/2" Length (Pack of 25)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 1-3/8" Length (Pack of 25)

Detail Reviews

Sep 04, 2011 21:36:04

8 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc / 10,000 Pc. Carton

8 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc / 10,000 Pc. Carton Reviews

Other Picture

8 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc / 10,000 Pc. Carton Feature

• 8 X 3/8 Type 25 Thread Cutting Screws
• Pan Head
• Type 25 Thread Cutting Screw
• Zinc Plated

8 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc

Visit Store Now !!

Detail Products

Detail Reviews

Sep 02, 2011 14:56:05

Stainless Steel 316 Machine Screw, Flat Head, Slotted Drive, #10-24, 3/8" Length (Pack of 25)

Stainless Steel 316 Machine Screw, Flat Head, Slotted Drive, #10-24, 3/8" Length (Pack of 25) Reviews

Other Picture

Stainless Steel 316 Machine Screw, Flat Head, Slotted Drive, #10-24, 3/8" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #0-80, 1/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 5/8" Length (Pack of 100)

Detail Reviews

Aug 31, 2011 06:24:06

4 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc / 10,000 Pc. Carton

4 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc / 10,000 Pc. Carton Reviews

Other Picture

4 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc / 10,000 Pc. Carton Feature

• 4 X 3/8 Type 25 Thread Cutting Screws
• Pan Head
• Type 25 Thread Cutting Screw
• Zinc Plated

4 X 3/8 Type 25 TCS / Slotted / Pan Head / Steel / Zinc

Visit Store Now !!

Detail Products

Detail Reviews

Aug 28, 2011 19:18:37

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #3-48, 1/4" Length (Pack of 100)

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #3-48, 1/4" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #3-48, 1/4" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #0-80, 1/8" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #4-40, 1/2" Length (Pack of 25)
• Brass Machine Screw, Round Head, Slotted Drive, #10-24, 3/8" Length (Pack of 100)

Detail Reviews

Aug 27, 2011 08:11:06

Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100)

Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Round head style for a finished appearance
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, #4-40, 1/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.256" ID, 0.290" OD, 0.031" Thick, 0.348" Shoulder Diameter, 0.093" Length (Pack of 100)

Detail Reviews

Aug 21, 2011 12:21:13

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-28, 3/4" Length (Pack of 100)

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-28, 3/4" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Thumb Screw, Knurled Head, Slotted Drive, 1/4"-28, 3/4" Length (Pack of 100) Feature

• Thumb Screws allow for simple "by-hand" installation
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Knurled head provides extra grip for manual tightening
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Thumb screws are designed to be tightened and loosened by hand. They come in a variety of head styles, but each includes an easy-grip head which allows for simple "by-hand" installation.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Usually found on thumb screws, a knurled surface on the head gives a better gripping surface, making it easier to tighten or loosen fasteners manually. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Nylon 6/6 Thumb Screw, Knurled Head, #6-32, 1" Length (Pack of 100)
• Nylon 6/6 Thumb Nut, 1/4"-20 (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)

Detail Reviews

Aug 18, 2011 15:48:14

Brass 330 Machine Screw, Round Head, Slotted Drive, #0-80, 1/2" Length (Pack of 100)

Brass 330 Machine Screw, Round Head, Slotted Drive, #0-80, 1/2" Length (Pack of 100) Reviews

Other Picture

Brass 330 Machine Screw, Round Head, Slotted Drive, #0-80, 1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Brass is suitable where corrosion resistance is a primary consideration
• Round head style for a finished appearance
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Round head fasteners have a dome-shaped head. An older style of head, it is typically used when replacing existing round-head fasteners where an exact match is desired. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Brass Machine Screw, Round Head, Slotted Drive, #5-40, 1/2" Length (Pack of 100)
• Brass Machine Screw, Pan Head, Phillips Drive, #5-40, 1/4" Length (Pack of 100)
• Brass Hex Nut, #6-32 (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #4-40, 1-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)

Detail Reviews

Aug 10, 2011 09:26:03

10 X 1/2 Self-Tapping Screws Slotted / Hex Washer Hd / Type AB / Serrated / 18-8 Stainless / 3,000 Pc. Carton

10 X 1/2 Self-Tapping Screws Slotted / Hex Washer Hd / Type AB / Serrated / 18-8 Stainless / 3,000 Pc. Carton Reviews

Other Picture

10 X 1/2 Self-Tapping Screws Slotted / Hex Washer Hd / Type AB / Serrated / 18-8 Stainless / 3,000 Pc. Carton Feature

• 10 X 1/2 Self-Tapping Screws
• Hex Washer Head
• Type AB Tapping Screw
• Stainless Steel

10 X 1/2 Self-Tapping Screws Slotted / Hex Washer Hd / Type AB / Serrated / 18-8 Stainless

Visit Store Now !!

Detail Products

Detail Reviews

Aug 05, 2011 11:30:04

Acetal Machine Screw, Flat Head, Slotted Drive, #4-40, 1/8" Length (Pack of 10)

Acetal Machine Screw, Flat Head, Slotted Drive, #4-40, 1/8" Length (Pack of 10) Reviews

Other Picture

Acetal Machine Screw, Flat Head, Slotted Drive, #4-40, 1/8" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Acetal is suitable where hardness and water resistance are important considerations
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Acetal resins are characterized by their strength, stiffness, and hardness, and are stable over a wide range of temperatures, humidity, environments, and stress. Acetal has a low coefficient of friction, and absorbs little water, minimizing the effect of moisture on its physical properties. Acetal resists neutral oils, grease, petroleum-based fuels, many organic solvents, alkalis, oxidizing agents and acids, both organic and inorganic. Compared to Nylon 6/6, Acetal is harder and has better water resistance, but lower impact strength and abrasion resistance. Acetal is translucent off white in color.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Acetal Machine Screw, Pan Head, Slotted Drive, #4-40, 3/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.265" ID, 0.307" OD, 0.062" Thick, 0.500" Shoulder Diameter, 0.249" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #4-40, 1-1/2" Length (Pack of 100)

Detail Reviews

Jul 28, 2011 06:53:05

Brass Wood Screw, Flat Head, Slotted Drive, #4, 1" Length (Pack of 100)

Brass Wood Screw, Flat Head, Slotted Drive, #4, 1" Length (Pack of 100) Reviews

Other Picture

Brass Wood Screw, Flat Head, Slotted Drive, #4, 1" Length (Pack of 100) Feature

• Wood Screws are designed for wood applications
• Brass is suitable where corrosion resistance is a primary consideration
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver

Wood screws are designed to attach two pieces of wood together. They generally feature a smooth, unthreaded shank below the head which ensures a tight attachment, and the threaded portion of the shank is tapered to increase the holding power. Threads specially designed for use in wood effectively resist pulling out.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

Visit Store Now !!

Detail Products

• Brass Machine Screw, Round Head, Slotted Drive, #8-32, 3/16" Length (Pack of 100)
• Brass Wood Screw, Round Head, Phillips Drive, #4, 5/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)
• Brass Machine Screw, Pan Head, Phillips Drive, #10-32, 3/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #10-24, 2" Length (Pack of 100)

Detail Reviews

Jul 17, 2011 20:04:04

Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, M2.5-0.45, 12mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, M2.5-0.45, 12mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, M2.5-0.45, 12mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Pan head allows for higher tightening torques
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M3-0.5, 20mm Length (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M3-0.5, 12mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)

Detail Reviews

Jul 16, 2011 21:06:04