Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 5/16" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 5/16" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 5/16" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Hex Nut with Washer, #8-32 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Zinc Plated Steel Hex Nut, 5/16"-18 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 9/16" Length (Pack of 100)

Detail Reviews

Oct 03, 2011 09:37:04

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 10mm Length (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)
• Arctic Silver 5 Large Size 12 gram tube
• Steel Lock Nut, DIN, M3-0.5 (Pack of 100)

Detail Reviews

Sep 20, 2011 05:58:17

Zinc Plated Steel Self Drilling Screw, Pan Head, Phillips Drive, #8-18, 1-1/4" Length (Pack of 100)

Zinc Plated Steel Self Drilling Screw, Pan Head, Phillips Drive, #8-18, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Self Drilling Screw, Pan Head, Phillips Drive, #8-18, 1-1/4" Length (Pack of 100) Feature

• Create their own threads when driven into material
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #10-16, 1/2" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Hex Head, #6, 1/2" Length (Pack of 100)
• Zinc Plated Steel Self Drilling Screw, Flat Head, Phillips Drive, #8-18, 1-1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #1-72, 5/16" Length (Pack of 100)

Detail Reviews

Sep 13, 2011 12:25:06

Zinc Plated Steel Self Drilling Screw, Hex Head, #8-18, 5/8" Length (Pack of 100)

Zinc Plated Steel Self Drilling Screw, Hex Head, #8-18, 5/8" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Self Drilling Screw, Hex Head, #8-18, 5/8" Length (Pack of 100) Feature

• Create their own threads when driven into material
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Hex head for easy driving
• Length is measured from under the head

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Sheet Metal Screw, Hex Head, #6, 1-1/4" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #10-16, 1/2" Length (Pack of 100)
• Zinc Plated Steel Lag Bolt, Hex Head, 5/16", 3-1/2" Length (Pack of 10)
• Brass Machine Screw, Round Head, Slotted Drive, 1/4"-28, 1" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)

Detail Reviews

Sep 06, 2011 01:50:03

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, 3/8"-16, 1" Length (Pack of 10)

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, 3/8"-16, 1" Length (Pack of 10) Reviews

Other Picture

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, 3/8"-16, 1" Length (Pack of 10) Feature

• Socket Cap Screws are durable and reliable
• Chrome Plated Steel fasteners are suitable where strength, corrosion resistance and aesthetics are primary considerations
• Button head provides a finished look
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Socket Cap Screws, also known as Allen head screws, are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Chrome Plating helps to prevent corrosion.

Button head style fasteners combine the driving ease of a socket cap screw (using hex socket for driving) with the smooth, rounded appearance of a round-head screw. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Chrome Plated Alloy Steel Socket Cap Screw, Hex Socket Drive, #10-32, 2" Length (Pack of 5)
• Alloy Steel Socket Cap Screw, Button Head, Hex Socket Drive, 1/2"-13, 1-1/4" Length (Pack of 100)
• Chrome Plated Steel Hex Bolt, 5/16"-18, 1" Length (Pack of 10)
• Chrome Plated Steel Socket Cap Screw, Flat Head, Hex Socket Drive, #10-24, 1-1/4" Length (Pack of 10)
• Black Oxide Heat Treated Alloy Steel Socket Head Cap Screw, Hex Socket Drive, 1/4"-28, 7/8" Length (Pack of 100)

Detail Reviews

Aug 25, 2011 13:53:05

Zinc Plated Steel Sheet Metal Screw, Hex Head, #6, 1-1/4" Length (Pack of 100)

Zinc Plated Steel Sheet Metal Screw, Hex Head, #6, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Sheet Metal Screw, Hex Head, #6, 1-1/4" Length (Pack of 100) Feature

• Pointed end and widely spaced threads
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Hex head for easy driving
• Length is measured from under the head

Sheet metal screws have a pointed end and widely spaced threads. They're self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 12mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #10-32, 1-3/4" Length (Pack of 100)

Detail Reviews

Aug 12, 2011 11:00:05

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Steel Lock Nut, DIN, M3-0.5 (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1-3/8" Length (Pack of 100)

Detail Reviews

Jul 31, 2011 05:24:05

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #10-32, 1/4" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1-3/8" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #4-40, 3/8" Length (Pack of 100)
• Zinc Plated Steel Hex Nut with Washer, #4-40 (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #10-24, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)

Detail Reviews

Jul 25, 2011 06:50:23

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Hex Nut with Washer, #6-32 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Zinc Plated Steel Hex Nut, #2-56 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)

Detail Reviews

Jun 19, 2011 05:33:03

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Hex Nut with Washer, #6-32 (Pack of 100)
• Zinc Plated Steel Hex Nut, 5/16"-18 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Zinc Plated Steel Internal Tooth Lock Washer, 1/4", 0.262" ID, 0.469" OD, 0.026" Thick (Pack of 100)

Detail Reviews

Jun 15, 2011 00:41:05

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #6-32, 3/8" Length (Pack of 10)

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #6-32, 3/8" Length (Pack of 10) Reviews

Other Picture

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #6-32, 3/8" Length (Pack of 10) Feature

• Socket Cap Screws are durable and reliable
• Chrome Plated Steel fasteners are suitable where strength, corrosion resistance and aesthetics are primary considerations
• Button head provides a finished look
• Drive system is a hexagon-shaped hole
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Socket Cap Screws, also known as Allen head screws, are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Chrome Plating helps to prevent corrosion.

Button head style fasteners combine the driving ease of a socket cap screw (using hex socket for driving) with the smooth, rounded appearance of a round-head screw. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Alloy Steel Socket Cap Screw, Button Head, Hex Socket Drive, #10-32, 1/2" Length (Pack of 100)
• Chrome Plated Alloy Steel Socket Cap Screw, Hex Socket Drive, 5/16"-24, 3/4" Length (Pack of 5)
• Stainless Steel Socket Cap Screw, Hex Socket Drive, #10-32, 1-1/2" Length (Pack of 100)
• Chrome Plated Steel Hex Bolt, 3/8"-24, 1-1/4" Length (Pack of 10)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-28, 2-1/4" Length (Pack of 25)

Detail Reviews

May 29, 2011 20:40:36

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 50)

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 50) Reviews

Other Picture

Zinc Plated Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #10-32, 1/4" Length (Pack of 50) Feature

• Set Screws keep parts from turning relative to a shaft
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Do not have an external head
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials. Zinc Plating helps to prevent corrosion.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Cup Point is the most common point type, with good holding capability.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Alloy Steel Set Screw, Hex Socket Drive, Cup Point, #6-32, 5/16" Length (Pack of 25)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, 5/16"-24, 1/4" Length (Pack of 50)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #0-80, 1/4" Length (Pack of 100)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Flat Point, #10-24, 3/16" Length (Pack of 50)
• Black Oxide Alloy Steel Set Screw, Hex Socket Drive, Cone Point, 1/4"-20, 1/4" Length (Pack of 50)

Detail Reviews

Apr 10, 2011 12:07:04

Zinc Plated Steel Self Tapping Screw, Flat Head, Phillips Drive, #8-18, 1" Length (Pack of 100)

Zinc Plated Steel Self Tapping Screw, Flat Head, Phillips Drive, #8-18, 1" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Self Tapping Screw, Flat Head, Phillips Drive, #8-18, 1" Length (Pack of 100) Feature

• Create their own threads when driven into material
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Self Drilling Screw, Pan Head, Phillips Drive, #10-16, 1-1/2" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Hex Head, #14, 3/4" Length (Pack of 100)
• Stainless Steel Sheet Metal Screw, Flat Head, Phillips Drive, Self-Drilling Point, #8-18, 3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)

Detail Reviews

Mar 27, 2011 05:00:05