Showing posts with label 632. Show all posts
Showing posts with label 632. Show all posts

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Reviews



Other Picture


Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 15, 2011 00:41:05
0 comments
Labels: , , , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100)

Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 14, 2011 03:55:04
0 comments
Labels: , , , ,

Brass Machine Screw, Pan Head, Phillips Drive, #6-32, 1/2" Length (Pack of 100)

Brass Machine Screw, Pan Head, Phillips Drive, #6-32, 1/2" Length (Pack of 100) Reviews



Other Picture


Brass Machine Screw, Pan Head, Phillips Drive, #6-32, 1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Brass is suitable where corrosion resistance is a primary consideration
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 10, 2011 05:38:04
0 comments
Labels: , , , , ,

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3" Length (Pack of 25)

Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3" Length (Pack of 25) Reviews



Other Picture


Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3" Length (Pack of 25) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Flat head style allows fastener to sit flush to the surface
  • Driven by a flat-bladed driver
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 07, 2011 18:43:23
0 comments
Labels: , , , , , ,

Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #6-32, 1" Length (Pack of 100)

Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #6-32, 1" Length (Pack of 100) Reviews



Other Picture


Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #6-32, 1" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations; black color
  • Binding head provides a large surface area for extra surface contact under the head
  • Accommodates both Phillips and Slotted drivers
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Combination Phillips-Slotted drive styles allow for greater flexibility in choosing a drive tool (either Phillips or standard slotted).

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 05, 2011 17:42:21
0 comments
Labels: , , , , ,

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #6-32, 3/8" Length (Pack of 10)

Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #6-32, 3/8" Length (Pack of 10) Reviews



Other Picture


Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, #6-32, 3/8" Length (Pack of 10) Feature

  • Socket Cap Screws are durable and reliable
  • Chrome Plated Steel fasteners are suitable where strength, corrosion resistance and aesthetics are primary considerations
  • Button head provides a finished look
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Socket Cap Screws, also known as Allen head screws, are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Chrome Plating helps to prevent corrosion.

Button head style fasteners combine the driving ease of a socket cap screw (using hex socket for driving) with the smooth, rounded appearance of a round-head screw. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




May 29, 2011 20:40:36
0 comments
Labels: , , , , , , ,

Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #6-32, 2-1/2" Length (Pack of 10)

Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #6-32, 2-1/2" Length (Pack of 10) Reviews



Other Picture


Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #6-32, 2-1/2" Length (Pack of 10) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Flat head style allows fastener to sit flush to the surface
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




May 21, 2011 07:29:04
0 comments
Labels: , , , , , , , ,

Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)

Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100) Reviews



Other Picture


Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Binding head provides a large surface area for extra surface contact under the head
  • Driven by a flat-bladed driver
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 23, 2011 01:44:04
0 comments
Labels: , , , , , , ,