Nylon 6/6 Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100)

Nylon 6/6 Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)

Detail Reviews

Sep 29, 2011 20:38:10

Drawer Front Screws, 8-32 x 1-1/2'', 24 per bag

Drawer Front Screws, 8-32 x 1-1/2'', 24 per bag Reviews

Other Picture

Drawer Front Screws, 8-32 x 1-1/2'', 24 per bag Feature

• 8-32 x 1-1/2'' Drawer Front Screws
• Use for drawer front knobs and pulls
• Standard #8-32 threading
• Zinc plated
• 24 per bag

Use for drawer front knobs and pulls. Standard #8-32 threading is common for the majority of cabinet knobs and pulls. Truss head design has a flatter profile than a regular round head screw. Zinc plated. 24 per bag.

Visit Store Now !!

Detail Products

• Drawer Front Screws, 8-32 x 1-3/4'' , 24 per bag
• Drawer Front Screws, 8-32 x 1-1/4'' , 24 per bag
• Drawer Front Screws, 8-32 x 1'', 24 per bag

Detail Reviews

Sep 15, 2011 16:22:25

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #8-32, 1-1/2" Length (Pack of 25)

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #8-32, 1-1/2" Length (Pack of 25) Reviews

Other Picture

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #8-32, 1-1/2" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #4-40, 1/2" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 3" Length (Pack of 25)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, #10-24, 3/4" Length (Pack of 25)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

Detail Reviews

Aug 30, 2011 02:01:09

Simpson Strong Tie SD10112R100 #10 x 1-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package

Simpson Strong Tie SD10112R100 #10 x 1-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package Reviews

Other Picture

Simpson Strong Tie SD10112R100 #10 x 1-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package Feature

• #10 Diameter
• 1-1/2" Length
• 1/4" Hex Drive
• Mechanically-galvanized coating meets ASTM B695 Class 55
• Ideal for use in tight spaces where using a hammer is inconvenient

Strong-Drive SD structural-connector screw for use with our connectors. Designed to replace nails in certain products, the load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie connectors. In certain applications screws are easier and more convenient to install than nails, and the singlefastener load values achieved by the SD9 and SD10 exceed those of typical 10d common or 16d common nails, respectively. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. The SD structural-connector screw features an optimized shank which is specifically designed to match the diameter of the fastener holes in Simpson Strong-Tie connectors. The hex head virtually eliminates cam-out and helps avoid stripping of the head during installation. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved drivability.

Visit Store Now !!

Detail Products

• Simpson Strong Tie SD10212R100 #10 x 2-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package

Detail Reviews

Jul 09, 2011 15:32:03

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Hex Nut with Washer, #6-32 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Zinc Plated Steel Hex Nut, #2-56 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)

Detail Reviews

Jun 19, 2011 05:33:03

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Hex Nut with Washer, #6-32 (Pack of 100)
• Zinc Plated Steel Hex Nut, 5/16"-18 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)
• Zinc Plated Steel Internal Tooth Lock Washer, 1/4", 0.262" ID, 0.469" OD, 0.026" Thick (Pack of 100)

Detail Reviews

Jun 15, 2011 00:41:05

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, Nylon Patch, #10-32, 1-1/2" Length (Pack of 5)

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, Nylon Patch, #10-32, 1-1/2" Length (Pack of 5) Reviews

Other Picture

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, Nylon Patch, #10-32, 1-1/2" Length (Pack of 5) Feature

• Socket Cap Screws are durable and reliable
• Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
• Flat head style allows fastener to sit flush to the surface
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths. A spot of nylon applied to the threads increases gripping power and keeps the screw in place.

Visit Store Now !!

Detail Products

• Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, #10-24, 3/8" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 1/4"-28, 2-1/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Socket Cap Screw, Hex Socket Drive, #10-32, 1-1/2" Length (Pack of 100)
• Stainless Steel Socket Cap Screw, Flat Head, Hex Socket Drive, #4-40, 1/4" Length (Pack of 25)

Detail Reviews

May 20, 2011 06:13:03

Stainless Steel Sheet Metal Screw, Oval Head, Phillips Drive, #14-10, 1-1/2" Length (Pack of 100)

Stainless Steel Sheet Metal Screw, Oval Head, Phillips Drive, #14-10, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Sheet Metal Screw, Oval Head, Phillips Drive, #14-10, 1-1/2" Length (Pack of 100) Feature

• Pointed end and widely spaced threads
• Stainless Steel is suitable where formability and cost are important considerations
• Oval head style for recessed finish with a slightly rounded surface
• Phillips drive is designed to cam out under too much torque

Sheet metal screws have a pointed end and widely spaced threads. They're self-starting in thin sheet metal, but in thicker materials a drilled hole is recommended.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #8-18, 7/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #8-32, 2-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #1-64, 1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #12-24, 1/2" Length (Pack of 100)

Detail Reviews

Apr 30, 2011 06:56:04

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/2" Length (Pack of 50)

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/2" Length (Pack of 50) Reviews

Other Picture

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/2" Length (Pack of 50) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Socket cap head fasteners are very common in industrial applications
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, 1/4"-20, 3/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #4-40, 3/4" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #8-32, 5/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #2-56, 1" Length (Pack of 100)

Detail Reviews

Mar 22, 2011 14:47:04