(5-57200) 25# 2" Red Exterior Screws

(5-57200) 25# 2" Red Exterior Screws Reviews

Other Picture

(5-57200) 25# 2" Red Exterior Screws Feature

• Patented Philips Square Driv Drive System
• The Screw You've Used for Years Now Has a New Name!
• ACR - Wont Strip Out-Allows for More Torque
• Lifetime Guarantee-Will Not Rust
• Can be used in Pressure Treated Lumber

Approx. 2250 screws per box. Sold by weight

Visit Store Now !!

Detail Products

Detail Reviews

Mar 01, 2011 08:12:04

8x1/2 Phillips Trim Oval Self Tapping Screw Type A W/#Six Head Full Thrd 18 8 Stainles,500 Pcs

8x1/2 Phillips Trim Oval Self Tapping Screw Type A W/#Six Head Full Thrd 18 8 Stainles,500 Pcs Reviews

Other Picture

8X1/2 Phillips Trim Oval Self Tapping Screw Type A w/#Six Head Full Thrd 18 8 Stainles. Type A thread for self starting in thin (.015 - .050 inch thick) metal or resin-filled plywood. Oval head screws are preferred over a flat head when a more decorative look is desired or when fastening onto a conical surface.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 28, 2011 12:05:03

Zinc Plated Steel Self Tapping Screw, Hex Head, #10-16, 3" Length (Pack of 100)

Zinc Plated Steel Self Tapping Screw, Hex Head, #10-16, 3" Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Self Tapping Screw, Hex Head, #10-16, 3" Length (Pack of 100) Feature

• Create their own threads when driven into material
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Hex head for easy driving
• Length is measured from under the head

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Sheet Metal Screw, Hex Head, #10, 1/2" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)
• Zinc Plated Steel Self Tapping Screw, Pan Head, Phillips Drive, #4-24, 1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

Detail Reviews

Feb 27, 2011 12:40:10

10-32x1 1/2 Slotted Binding Undercut Machine Screw Fully Threaded Zinc, Pkg Of 3000

10-32x1 1/2 Slotted Binding Undercut Machine Screw Fully Threaded Zinc, Pkg Of 3000 Reviews

Other Picture

10-32X1 1/2 Slotted Binding Undercut Machine Screw Fully Threaded Zinc. Machine Screws are designed to go through a hole or nut that is pre-tapped to form a mating thread for that screw. Binding head screws are the preferred design for making a firm electrical connection.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 02:28:03

10x3/8 Slot Pan Self Tapping Screw Type A B Fully Threaded 18 8 Stainless, Pkg Of 4000

10x3/8 Slot Pan Self Tapping Screw Type A B Fully Threaded 18 8 Stainless, Pkg Of 4000 Reviews

Other Picture

10X3/8 Slot Pan Self Tapping Screw Type A B Fully Threaded 18 8 Stainless. Type AB thread for use in the thinner sheet metal like used in appliances. Pan head screws are a common style that can substituted in most applications for round, truss or binding heads.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 25, 2011 06:18:03

Stainless Steel Machine Screw, Flat Head, Tamper Resistant Pin-in-Star Drive, #8-32, 3/8" Length (Pack of 100)

Stainless Steel Machine Screw, Flat Head, Tamper Resistant Pin-in-Star Drive, #8-32, 3/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Flat Head, Tamper Resistant Pin-in-Star Drive, #8-32, 3/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Prevents tampering by requiring special tool to remove
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Loosening tamper-resistant fasteners requires rare tools that the average user is not likely to have on hand, often preventing vandalism, theft, or product modifications by untrained users. Although not impossible to obtain, drivers for tamper resistant screws are rare and usually more difficult to find.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)

Detail Reviews

Feb 24, 2011 09:04:04

25# 9 x 2-1/2" Grn Exterior Screws

25# 9 x 2-1/2" Grn Exterior Screws Reviews

More Picture

25# 9 x 2-1/2" Grn Exterior Screws Feature

• Patented Phillips Square Driv Drive System
• The Screw You've Used For Years Now Has A New Name!
• ACR - Won't Strip Out, Drives Off-Angle and Allows for More Torque
• Lifetime Guarantee Will Not Rust - Can be used in Pressure Treated Lumber
• Blue Driver Bit Included. Can use a #2 square and #2 phillips (ACR2 Phillips sold separately)

Approx. 2075 screws per box. Sold by weight.

Go tO Store Now !!

More Products

• 25# 9 x 3" Grn Exterior Screws
• (03162) 25# 1-5/8" Grn Exterior Screws
• 5# 9 x 3-1/2" Grn Exterior Screws
• 5# 9 x 2" Grn Exterior Screws

More Reviews

Feb 23, 2011 04:53:06

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 5/8" Length (Pack of 100)

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 5/8" Length (Pack of 100) Reviews

More Picture

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 5/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Go tO Store Now !!

More Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 3/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #12-24, 3/8" Length (Pack of 100)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, 5/16"-18, 2" Length (Pack of 25)

More Reviews

Feb 22, 2011 06:31:04

6-32x3/8 Coarse Thread Button Head Socket Cap Screw Plain, Pkg Of 100

6-32x3/8 Coarse Thread Button Head Socket Cap Screw Plain, Pkg Of 100 Reviews

More Picture

6-32X3/8 Coarse Thread Button Head Socket Cap Screw Plain. Cap Screws are designed to go through a hole or nut that is pre-tapped to form a mating thread for that screw. Cylindrical head with a rounded top.

Go tO Store Now !!

More Products

More Reviews

Feb 21, 2011 10:45:03

Hillman Fasteners 100Pk 6X1 Fh Wd Screw 40021 Wood Screws Flat Head Zinc Phillips

Hillman Fasteners 100Pk 6X1 Fh Wd Screw 40021 Wood Screws Flat Head Zinc Phillips Reviews

More Picture

Hillman Fasteners 100Pk 6X1 Fh Wd Screw 40021 Wood Screws Flat Head Zinc Phillips Feature

• 100 Pack
• #6 x 1"
• Zinc Wood Screw
• Phillips
• Flat Head

100 Pack, #6 x 1', Phillips, Flat Head, Zinc Wood Screw.

Go tO Store Now !!

More Products

More Reviews

Feb 20, 2011 12:39:06

Senco 06A162P DuraSpin Number 6 by 1-5/8-Inch Drywall to Wood Collated Screw (1,000 per Box)

Senco 06A162P DuraSpin Number 6 by 1-5/8-Inch Drywall to Wood Collated Screw (1,000 per Box) Reviews

More Picture

Senco 06A162P DuraSpin Number 6 by 1-5/8-Inch Drywall to Wood Collated Screw (1,000 per Box) Feature

• Collated screws for drywall-to-wood applications
• Features gray phosphate coating for greater productivity
• Packaged in an easy-to-carry tub with a convenient handle
• Packed in strips of 50 and 1,000 total screws per box

Save time and money with the Senco 06A162P DuraSpin Number 6 1-5/8-Inch Drywall-to-Wood Collated Screw (1,000 per Box). Designed for attaching drywall to wood, this package provides 1,000 screws to help complete extended flooring jobs. Boasting superior quality and performance, the 06A162P is ideal for professionals and do-it-yourselfers who want to get it right the first time.

DuraSpin Drywall-to-Wood Collated Screws At a Glance: 6" x 1-5/8" screws for attaching drywall to wood Packaged in see-through, easy-carry tub 1,000 screws (50 per strip) for extended flooring jobs Guaranteed to fit any compatible tool brand that's listed on the label Gray phosphate coating for productivity and dependable performance

Collation technology minimizes waste and saves money. View larger.

Includes 1,000 6" x 1-5/8" screws for attaching drywall to wood.

Innovative Senco Collation Technology
These screws boast collation technology, which means no more partially used strips, no more waste, and more money in your pocket. In fact, in repeated tests, Senco's collation technology far outperformed competitive brands.

Duraspin Design for Easy Spinning and Strong Attachments
Designed for high productivity, the 06A162P features a Duraspin design for easy spinning and strong attachments. Gray phosphate coating makes for high productivity and dependable performance.

These screws arrive conveniently packaged in an easy-to-carry see-through tub, which makes it easy to keep track of your supply. And with 1,000 screws per package (50 screws per strip), you'll be able to tackle and finish even the biggest jobs without running out of screws.

More Completed Drives
Like all Senco screws, the 06A162P is guaranteed to fit any compatible tool brand that's listed on the label. That means no jams, and no jams means less down-time and increased productivity.

Compatibility Information
The 06A162P screws are compatible with the Senco Duraspin Cordless Screw Driver 800001N, the True Value #572153, and the following models: DS300-AC, DS300-24V, DS300-S2, and DS300-S4.

About Senco: Innovation Backed by Experience
For over 50 years, Senco has been setting quality and performance standards for the fastener industry. In fact, Senco was the true inventor of the pneumatic fastening industry way back in 1950, and they've been the leading innovator in fastener technologies ever since. As a company, Senco has achieved an unheard of ten thousand hours of fastener engineering expertise.

In just one year, their plant in Cincinnati alone uses enough wire to make 18 trips to the moon and back. Even more impressive is the fact that since 1996, Senco has sold over 500 trillion fasteners to trusted companies like Fleetwood, Champion, Merillat, Ashley Furniture, and other major manufacturers.

What's in the Box
06A162P (1,000 count) 6 x 1-5/8-inch drywall-to-wood collated screws in see-through container.

1000 Pack, 1-5/8", #6 Drywall To Wood Screw, Gray Phosphate Coating, For High Productivity, 50 Screws Per Strip, Easy To Carry Tub With Handle, Fits Senco Duraspin Cordless Screw Driver 800001N, True Value #572153.

Go tO Store Now !!

More Products

• Senco 1R0004N DS200-AC Duraspin 3,300 RPM Collated Screwdriver
• Senco 06A125P DuraSpin Number 6 by 1-1/4-Inch Drywall to Wood Collated Screw (1,000 per Box)
• Pentagon Tool "Foot Lifter"--Mini-Lifter for Drywall and Sheetrock
• Troy DPH11 Professional Series 11 Foot Drywall & Panel Lift Hoist
• Stanley 93-301 14-Inch Yellow Panel Carry Handle

More Reviews

Feb 19, 2011 15:15:05