Stainless Steel Machine Screw, Flat Head, Star Drive, #2-56, 1/2" Length (Pack of 100)

Stainless Steel Machine Screw, Flat Head, Star Drive, #2-56, 1/2" Length (Pack of 100) Reviews



Other Picture


Stainless Steel Machine Screw, Flat Head, Star Drive, #2-56, 1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Flat head style allows fastener to sit flush to the surface
  • Star Drive allows for high torque transfer
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Star Drives, also known as Torx Drives, feature a six-pointed star-shaped drive which allows higher torque transfer from the driver to the bit.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 30, 2011 13:48:04
0 comments
Labels: , , , , ,

Simpson Strong Tie SD10212R100 #10 x 2-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package

Simpson Strong Tie SD10212R100 #10 x 2-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package Reviews



Other Picture


Simpson Strong Tie SD10212R100 #10 x 2-1/2" Strong-Drive Galvanized Hex Head Connector Screw 100 per Package Feature

  • #10 Diameter
  • 2-1/2" Length
  • 1/4" Hex Drive
  • Mechanically-galvanized coating meets ASTM B695 Class 55
  • Ideal for use in tight spaces where using a hammer is inconvenient
Strong-Drive SD structural-connector screw for use with our connectors. Designed to replace nails in certain products, the load-rated SD screw has been tested and approved for use in many popular Simpson Strong-Tie connectors. In certain applications screws are easier and more convenient to install than nails, and the singlefastener load values achieved by the SD9 and SD10 exceed those of typical 10d common or 16d common nails, respectively. In addition, the galvanized coating makes the SD screw ideal for interior and most exterior conditions. The SD structural-connector screw features an optimized shank which is specifically designed to match the diameter of the fastener holes in Simpson Strong-Tie connectors. The hex head virtually eliminates cam-out and helps avoid stripping of the head during installation. The sharp point of the screw enables fast starts, and the patented serrated threads reduce torque for improved drivability.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 28, 2011 21:24:04
0 comments
Labels: , , , ,

#10-24 S/S Machine Screws PH 10-24 x 1-1/4

#10-24 S/S Machine Screws PH 10-24 x 1-1/4 Reviews



Other Picture


#10-24 Pan head slotted drive machine screws. Stainless steel machine screws provide excellent corrosion resistance and are the work horse for modern boatbuilding or exterior woodworking applications. Sold in boxes of 100. Pan head means flat top with smooth rounded sides to provide flat bearing surface under the head to allow for lateral movement.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 27, 2011 10:42:06
0 comments
Labels: , ,

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/4" Length (Pack of 25)

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/4" Length (Pack of 25) Reviews



Other Picture


Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/4" Length (Pack of 25) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Socket cap head fasteners are very common in industrial applications
  • Drive system is a hexagon-shaped hole
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 25, 2011 11:06:35
0 comments
Labels: , , , , , , , ,

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #10-32, 3/4" Length (Pack of 25)

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #10-32, 3/4" Length (Pack of 25) Reviews



Other Picture


Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #10-32, 3/4" Length (Pack of 25) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
  • Flat head style allows fastener to sit flush to the surface
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 24, 2011 15:01:04
0 comments
Labels: , , , , , ,

Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #8-32, 1-3/8" Length (Pack of 10)

Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #8-32, 1-3/8" Length (Pack of 10) Reviews



Other Picture


Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #8-32, 1-3/8" Length (Pack of 10) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 23, 2011 01:47:05
0 comments
Labels: , , , , , , , ,

100pc. #2 x 3/8" Silver Phillips Round-Head Wood Screws

100pc. #2 x 3/8" Silver Phillips Round-Head Wood Screws Reviews



Other Picture


100pc. #2 x 3/8" Silver Phillips Round-Head Wood Screws Feature

  • Great for all woodworking and hobby uses calling for small screws
  • Shiny silver (nickel-plated) finish
  • Buy in bulk and save!
This is a bag of 100 shiny silver (nickel-plated) #2 x 3/8" Phillips round-head wood screws, perfect for use in woodworking, hobbies and crafts.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 21, 2011 18:06:14
0 comments
Labels: , , ,

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100) Reviews



Other Picture


Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 19, 2011 05:33:03
0 comments
Labels: , , , , , , ,

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, #10-32, 3/4" Length (Pack of 100)

Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, #10-32, 3/4" Length (Pack of 100) Reviews



Other Picture


Alloy Steel Socket Cap Screw, Flat Head, Hex Socket Drive, #10-32, 3/4" Length (Pack of 100) Feature

  • Socket Cap Screws are durable and reliable
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Flat head style allows fastener to sit flush to the surface
  • Drive system is a hexagon-shaped hole
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Socket Cap Screws are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 18, 2011 09:39:04
0 comments
Labels: , , , ,

Stainless Steel 18-8 Socket Cap Screw, Vented Hex Socket Drive, M5-0.8, 30mm Length (Pack of 10)

Stainless Steel 18-8 Socket Cap Screw, Vented Hex Socket Drive, M5-0.8, 30mm Length (Pack of 10) Reviews



Other Picture


Stainless Steel 18-8 Socket Cap Screw, Vented Hex Socket Drive, M5-0.8, 30mm Length (Pack of 10) Feature

  • Socket Cap Screws are durable and reliable
  • General Purpose Stainless Steel suitable where formability and cost are important considerations
  • Socket cap head fasteners are very common in industrial applications
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Socket Cap Screws, also known as Allen head screws, are reliable and durable and are used in many applications. They are available in a variety of head styles and materials.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material.

Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits. Vented fasteners have been drilled through their entire length to eliminate the possibility of virtual leaks caused by the trapped volume of air at the bottom of blind tapped holes.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 17, 2011 06:56:04
0 comments
Labels: , , , , , ,

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Reviews



Other Picture


Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 15, 2011 00:41:05
0 comments
Labels: , , , , , , ,

Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100)

Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100) Reviews



Other Picture


Alloy Steel Set Screw, Hex Socket Drive, #6-32, 3/4" Length (Pack of 100) Feature

  • Set Screws keep parts from turning relative to a shaft
  • Alloy Steel is one of the strongest materials used in fasteners, making this an ideal material to use when the primary concern is the application pulling apart
  • Do not have an external head
  • Drive system is a hexagon-shaped hole
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Set Screws are often used for holding a pulley, gear, or other parts from turning relative to a shaft.

Alloy Steel is steel that has been alloyed with other materials to improve overall physical properties. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). Tensile strength ranges for the alloys typically used in these fasteners range from 170,000 to 180,000 psi (pounds per square inch), making these amongst the strongest of materials.

Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 14, 2011 03:55:04
0 comments
Labels: , , , ,

Trim Head Square Drive Screws - #6 x 1-5/8''

Trim Head Square Drive Screws - #6 x 1-5/8'' Reviews



Other Picture


Trim Head Square Drive Screws - #6 x 1-5/8'' Feature

  • Trim Head Square Drive Screws
  • #6 x 1-5/8''
  • 100 per bag
  • Small 3/16'' head uses #1 driver
  • Black finish
This screw has the low profile of a finishing nail and the holding power of a screw. Small 3/16" head uses #1 driver. Black finish.

100 per bag.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 12, 2011 23:01:04
0 comments
Labels: , ,