Stainless Steel Machine Screw, Fillister Head, Slotted Drive, M.8-1.25, 0.100" Length (Pack of 10)

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, M.8-1.25, 0.100" Length (Pack of 10) Reviews

Other Picture

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, M.8-1.25, 0.100" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-24, 5/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 5/8" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Flat Head, Phillips Drive, M3-0.5, 25mm Length (Pack of 100)
• Stainless Steel A286 Socket Cap Screw, Hex Socket Drive, NAS, 1/4"-20, 5/8" Length (Pack of 1)
• Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10)

Detail Reviews

Jul 11, 2011 17:57:15